NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics 2x1 GigaBit LX to SX Regeneration Tap

Net Optics 2x1 GigaBit LX to SX Regeneration Taps solve the key physical layer challenges of multi-device monitoring for GigaBit LX networks. The built-in LX to SX media converter makes it easy to access LX links with SX devices. For a better picture of network health, these Taps connect two different GigaBit SX network management and security devices at any single GigaBit LX network location.


One Tap, No Idle Resources


Keep your intrusion detection and prevention systems, protocol analyzers, RMON probes, and other security devices productive with a single Regeneration Tap. Maximize resources and save on access points when multiple devices can monitor link traffic simultaneously through a single Regeneration Tap. Secure, passive access for multiple devices simply means a better return on monitoring investments. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.

Security and Visibility


Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Reliability


For extra uptime protection, Net Optics Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power.

Singlemode Specifications
Split Ratio: 50/50
Fiber Type: Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 3.7 dB


Multimode Specifications

Split Ratio: 50/50
Fiber Type: Multimode Corning 62.5/125µm, wavelength 850nm
Insertion Loss: Monitor Port: 4.5 dB


Operating Specifications

Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications

Power Supply:
Input: 100-240VAC, 0.5A, 47-63Hz
Dimensions: 1.75” high x 8.5” deep x 17” wide


Connectors:

(2) Multimode Duplex SC connectors (monitor ports)
(2) Singlemode Duplex SC connectors (network ports)


Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers
conform to the applicable requirements per US 21 CFR (J) and
EN 60825-1, also UL 1950 applications.


Optical Transmitter Wave Length:
1310 nm nominal
Output Power: -10 dB min, -3 dB max
Optical Receiver Input Sensitivity: 3 dB min, -20 dB max


Optical Transmitter Wave Length:
850 nm nominal
Output Power: -9.5 dB min, -4 dB max
Optical Receiver Input Sensitivity: 0 dB min, -17 dB max


Certifications:

Fully RoHS compliant


Part Number:

RGN-LX/SX-IL2



Passive, Secure Technology

 

Enables real-time, simultaneous monitoring of a single GigaBit LX link with two GigaBit SX monitoring devices

Supports passive monitoring at 1000 Mbps

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Redundant power ensures monitoring uptime

Fully IEEE 802.3 compliant

Fully RoHS compliant



Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use


LED indicators show redundant power, speed, link, and activity status

Front-mounted connectors support easy installation and operation

Connectors are perfectly angled to reduce cable strain

Silk-screened application diagram illustrates all connections for easy deployment

Optional custom monitoring cables support easy full-duplex monitoring by sending each side of the signal to a separate monitoring device NIC

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems 


Part Numbers

2x1 GigaBit LX to SX
Regeneration Tap

- RGN-LX/SX-IL2
 
Regen, 2x1, IL, Fiber, LX(8.5µm) to SX(62.5µm), SC, 1310nm



Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>