NextGig Systems, Inc. - Network Connectivity & Test Solutions

Net Optics GigaBit LX to SX Tap

Net Optics GigaBit LX to SX Tap simplifies connecting SX fiber monitoring and security devices to LX fiber network links. Convert LX to SX and tap into the link with one device, reducing cost and complexity at the same time. GigaBit LX to SX Taps support passive monitoring of GigaBit links at 1000 Mbps.


Transparent Access


GigaBit LX to SX Taps establish permanent passive access ports without introducing a point of failure or disturbing other network connections. These passive Taps deliver full-duplex monitoring with zero impact on network traffic around the clock. Net Optics unique dust cap is tethered to the connector so it is always right where you need it.


Security and Visibility

Without an IP address, monitoring devices are isolated from the network, dramatically reducing their exposure to attacks. However, the monitoring device connected to the Tap still sees all full-duplex traffic as if it were in-line, including Layer 1 and Layer 2 errors.

Simply Plug It In

Full-duplex monitoring is a snap with supplied cables. All network and monitoring cables necessary for plug-and-play deployment are included with the Tap.

Reliability

For extra uptime protection, Net Optics GigaBit LX to SX Taps offer redundant power connections. Should the primary power source fail, the Tap automatically switches to the backup power source. Power LEDs on the front of the Tap indicate the current power source – even if power is lost and reapplied, there is always zero delay to network traffic.


Singlemode Specifications
Split Ratio: 70/30
Fiber Type: Singlemode Corning 8.5/125µm, wavelength 1310nm
Insertion Loss: Network Port: 2.0 dB


Multimode Specifications
Fiber Type: Multimode Corning 62.5/125µm, wavelength 850nm
Insertion Loss: Monitor Port: 6.1 dB


Operating Specifications
Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 10% min, 95% max, non-condensing


Mechanical Specifications
Power Supply:
Input: 100-240V ~ 0.5A 47-63Hz
Output: 5V 3A
Dimensions: 1.25” high x 8.5” deep x 6.5” wide


Connectors:
(1) Multimode Duplex SC connectors (monitor ports)
(2) Singlemode Duplex SC connectors (network ports)


Fiber Optic Interface:
Connectors: Class I, eye-safe, laser emitter type. These Class I Lasers conform to the applicable requirements per US 21 CFR (J), EN 60825-1, and UL 1950 applications.


Optical Transmitter Wave Length: 1310 nm nominal
Output Power: -10 dB min, -3 dB max
Optical Receiver Input Sensitivity: -3 dB min, -20 dB max

Optical Transmitter Wave Length: 850 nm nominal
Output Power: -9.5 dB min to -4 dB max
Optical Receiver Input Sensitivity: 0 dB min to -17 dB max


Certifications:
Fully RoHS compliant


Part Number: CVT-LX3/SX


Passive, Secure Technology


Provides passive access at 1000 Mbps without data stream interference or introducing a point of failure

Access GigaBit LX fiber links with SX fiber devices without a separate converter

Permanent in-line installation without affecting network performance

Passes all full-duplex traffic (including errors) from all layers for comprehensive troubleshooting

No IP address is needed for the Tap or monitoring device, enhancing monitoring security

Redundant power ensures monitoring uptime

Fully IEEE 802.3 compliant

Fully RoHS compliant


Warranty


All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use

LED indicators show redundant power and link status

Front-mounted connectors make installation and operation quick and easy

Silk-screened application diagram illustrates all connections for easy deployment

All network and monitoring cables included for plug-and-play deployment

Optional 19-inch rack frames hold up to 2 Taps

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems


GigaBit Fiber LX to SX


- CVT-LX5/SX
  Converter, Tap, Fiber, 1G, 
  LX(8.5µm) to SX(62.5µm), SC,
  50:50 split ratio


- RK-2V2
  2-Slot Rack Mount Frame



Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

net_optics_evaluation.html
net_optics_register.html
net_optics_quick_quote.html

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400

 
/body>