Net Optics Singlemode to Multimode Converters are simple and reliable devices for connecting multimode fiber traffic to single mode fiber devices and links. Use these bi-directional media converters individually to connect 100Base-FX multimode and singlemode devices, or in pairs at each end of long-distance singlemode fiber links. These Converters are the perfect solution dispersed networks where media conversion required between multimode segments separated by long distances.

Fast and Versatile

The Singlemode to Multimode Converters support seamless media conversion at 100 Mbps over link distances up to 2 kilometers with 62.5/125 multimode fiber and up to 15 kilometers with 8.5/125 singlemode fiber. The Singlemode to Multimode Converter supports either full or half-duplex transmission.

Fault Tolerant and Reliable

Net Optics Singlemode to Multimode Converters incorporate Link Fault Signaling, which gives the devices connected to the Converter critical information about link status. If either side of the bi-directional link fails, the Converter immediately communicates the fault to both devices, reducing the time required to activate a redundant path. To control jitter over long optical links, the Converter features Clock and Data Recovery (CDR). CDR ensures that the overall jitter budget is not exceeded when deploying converter pairs with long fiber links.

Multimode Fiber Type: Corning 62.5/125µm. Wavelength, 1300nm.
Singlemode Fiber Type: Corning 8.5/125µm. Wavelength, 1310nm.

Operating Temperature: 0°C to 55°C
Storage Temperature: -10°C to 70°C
Relative Humidity: 5% min, 95% max, non-condensing

Mechanical Specifications:
Power Supply Input: 100-240VAC 0.6A 50-60Hz
Power Supply Output: 5V 2.0A
Stand Alone Dimensions: 1” high x 5.25” deep x 2.85” wide
Rack Mount Dimensions: 1” high x 5.25” deep x 4.5” wide

Connectors:
(1) Singlemode SC Connector
(1) Multimode SC Connector

Certifications:
Fully RoHS compliant

Part Numbers:
FMC-SA (Stand-Alone)
FMC

Passive, Secure Technology

 

Provides transparent conversion at 100 Mbps without data stream interference or introducing a point of failure

Link Fault Signaling provides critical link status information

Clock and Data Recovery (CDR) control overall jitter when deploying converter pairs

Compatible with all 100Base-FX singlemode and multimode fibers

Fully IEEE 802.3u compliant

Fully RoHS compliant

Warranty

 

All Net Optics products come standard with a 1 year manufacturer's warranty

Optional 1 or 2 year extended warranty available at time of product purchase

 

Ease of Use

LED indicators show link status and redundant power

Front-mounted connectors support easy installation and operation

Optional 19-inch rack frames hold up to 3 or 12 Taps

Tested and compatible with all major manufacturers’ monitoring devices, including protocol analyzers, probes, and intrusion detection/prevention systems

Part Numbers

Singlemode to Multimode Converter (Stand-Alone)

- FMC-SA
  Converter, Fiber, MM/SM, SC,
  155mbps, Stand Alone

Singlemode to Multimode Converter (Rack-Mount)

- FMC
  Converter, Fiber, MM/SM, SC,
  155mbps

- RK-12
  Rack Panel Frame, 12-Slot 19"
- RK-3
  Rack Panel Frame, 3-Slot 19"

Net Optics - manufacturer of iTap™ - 10/100/1000 - GigaBit Network Taps, 10/100 - GigaBit Aggregator Taps, TX-SX, LX-SX All Converter Taps, IPS & IDS Bypass Switches, Matrix Switches and Teeny Tap™.

Resources

For more information, pricing, demonstration or evaluation on Net Optics Products please contact us here.

Questions? Call  1-805-277-2400